first version

- content on index
- tailwind setup

priv/gettext/en/LC_MESSAGES/errors.po

@@ -0,0 +1,112 @@
+## `msgid`s in this file come from POT (.pot) files.
+##
+## Do not add, change, or remove `msgid`s manually here as
+## they're tied to the ones in the corresponding POT file
+## (with the same domain).
+##
+## Use `mix gettext.extract --merge` or `mix gettext.merge`
+## to merge POT files into PO files.
+msgid ""
+msgstr ""
+"Language: en\n"
+
+## From Ecto.Changeset.cast/4
+msgid "can't be blank"
+msgstr ""
+
+## From Ecto.Changeset.unique_constraint/3
+msgid "has already been taken"
+msgstr ""
+
+## From Ecto.Changeset.put_change/3
+msgid "is invalid"
+msgstr ""
+
+## From Ecto.Changeset.validate_acceptance/3
+msgid "must be accepted"
+msgstr ""
+
+## From Ecto.Changeset.validate_format/3
+msgid "has invalid format"
+msgstr ""
+
+## From Ecto.Changeset.validate_subset/3
+msgid "has an invalid entry"
+msgstr ""
+
+## From Ecto.Changeset.validate_exclusion/3
+msgid "is reserved"
+msgstr ""
+
+## From Ecto.Changeset.validate_confirmation/3
+msgid "does not match confirmation"
+msgstr ""
+
+## From Ecto.Changeset.no_assoc_constraint/3
+msgid "is still associated with this entry"
+msgstr ""
+
+msgid "are still associated with this entry"
+msgstr ""
+
+## From Ecto.Changeset.validate_length/3
+msgid "should have %{count} item(s)"
+msgid_plural "should have %{count} item(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should be %{count} character(s)"
+msgid_plural "should be %{count} character(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should be %{count} byte(s)"
+msgid_plural "should be %{count} byte(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should have at least %{count} item(s)"
+msgid_plural "should have at least %{count} item(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should be at least %{count} character(s)"
+msgid_plural "should be at least %{count} character(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should be at least %{count} byte(s)"
+msgid_plural "should be at least %{count} byte(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should have at most %{count} item(s)"
+msgid_plural "should have at most %{count} item(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should be at most %{count} character(s)"
+msgid_plural "should be at most %{count} character(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should be at most %{count} byte(s)"
+msgid_plural "should be at most %{count} byte(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+## From Ecto.Changeset.validate_number/3
+msgid "must be less than %{number}"
+msgstr ""
+
+msgid "must be greater than %{number}"
+msgstr ""
+
+msgid "must be less than or equal to %{number}"
+msgstr ""
+
+msgid "must be greater than or equal to %{number}"
+msgstr ""
+
+msgid "must be equal to %{number}"
+msgstr ""

priv/gettext/errors.pot

@@ -0,0 +1,95 @@
+## This is a PO Template file.
+##
+## `msgid`s here are often extracted from source code.
+## Add new translations manually only if they're dynamic
+## translations that can't be statically extracted.
+##
+## Run `mix gettext.extract` to bring this file up to
+## date. Leave `msgstr`s empty as changing them here has no
+## effect: edit them in PO (`.po`) files instead.
+
+## From Ecto.Changeset.cast/4
+msgid "can't be blank"
+msgstr ""
+
+## From Ecto.Changeset.unique_constraint/3
+msgid "has already been taken"
+msgstr ""
+
+## From Ecto.Changeset.put_change/3
+msgid "is invalid"
+msgstr ""
+
+## From Ecto.Changeset.validate_acceptance/3
+msgid "must be accepted"
+msgstr ""
+
+## From Ecto.Changeset.validate_format/3
+msgid "has invalid format"
+msgstr ""
+
+## From Ecto.Changeset.validate_subset/3
+msgid "has an invalid entry"
+msgstr ""
+
+## From Ecto.Changeset.validate_exclusion/3
+msgid "is reserved"
+msgstr ""
+
+## From Ecto.Changeset.validate_confirmation/3
+msgid "does not match confirmation"
+msgstr ""
+
+## From Ecto.Changeset.no_assoc_constraint/3
+msgid "is still associated with this entry"
+msgstr ""
+
+msgid "are still associated with this entry"
+msgstr ""
+
+## From Ecto.Changeset.validate_length/3
+msgid "should be %{count} character(s)"
+msgid_plural "should be %{count} character(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should have %{count} item(s)"
+msgid_plural "should have %{count} item(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should be at least %{count} character(s)"
+msgid_plural "should be at least %{count} character(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should have at least %{count} item(s)"
+msgid_plural "should have at least %{count} item(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should be at most %{count} character(s)"
+msgid_plural "should be at most %{count} character(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+msgid "should have at most %{count} item(s)"
+msgid_plural "should have at most %{count} item(s)"
+msgstr[0] ""
+msgstr[1] ""
+
+## From Ecto.Changeset.validate_number/3
+msgid "must be less than %{number}"
+msgstr ""
+
+msgid "must be greater than %{number}"
+msgstr ""
+
+msgid "must be less than or equal to %{number}"
+msgstr ""
+
+msgid "must be greater than or equal to %{number}"
+msgstr ""
+
+msgid "must be equal to %{number}"
+msgstr ""

priv/repo/migrations/.formatter.exs

@@ -0,0 +1,4 @@
+[
+  import_deps: [:ecto_sql],
+  inputs: ["*.exs"]
+]

priv/repo/seeds.exs

@@ -0,0 +1,11 @@
+# Script for populating the database. You can run it as:
+#
+#     mix run priv/repo/seeds.exs
+#
+# Inside the script, you can read and write to any of your
+# repositories directly:
+#
+#     Homepage.Repo.insert!(%Homepage.SomeSchema{})
+#
+# We recommend using the bang functions (`insert!`, `update!`
+# and so on) as they will fail if something goes wrong.

priv/static/robots.txt

@@ -0,0 +1,5 @@
+# See https://www.robotstxt.org/robotstxt.html for documentation on how to use the robots.txt file
+#
+# To ban all spiders from the entire site uncomment the next two lines:
+# User-agent: *
+# Disallow: /